Table of Contents
Advertisement
■
Others
The lens makes a clicking noise.
• When the camera is turned on or off, the lens is moved, or an aperture operation is performed,
such a noise may be heard. This is not a malfunction.
• When the brightness changes after a zooming operation or moving the camera, the lens may make
a noise while adjusting the aperture. This is not a malfunction.
Zooming stops instantaneously.
• When using the Extended optical zoom, the zooming action will stop temporarily. This is not a
malfunction.
Red lamp illuminated when pressing shutter button halfway in dark locations.
• [AF Assist Lamp] is set to [ON] (→183).
Camera is hot.
• Camera may become a little warm during use, but this does not affect performance or quality.
Clock is incorrect.
• If you do not use the camera for a long time, the clock may be reset.
→ Reset the clock (→30).
When using zoom, picture becomes slightly warped and the edges of the subject become
colored.
• Pictures may be slightly warped or colored around the edges, depending on the zoom ratio, but this
is not a fault.
300
Others
Q&A Troubleshooting
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated