Table of Contents
Advertisement
Taking pictures by setting the shutter speed
(Shutter-Priority AE Mode)
When you set the shutter speed, the camera automatically optimizes the aperture value
for the brightness of the subject.
1
Set mode dial to [
2
Rotate the rear dial to set the shutter speed
• The operation can also be performed by rotating the control ring.
Shutter speed
Exposure meter
Shutter speeds that can be set (seconds)
60 - 1/2000
(When the mechanical shutter is used)
1 - 1/16000
(When the electronic shutter is used)
59
Taking pictures by setting the aperture value and shutter speed
]
Aperture value
set
F3.3 - F8.0
Recording mode
15
30
60
125
250
8.0
5.6
4.0
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated