Panasonic Lumix DC-ZS200 Owner's Manual page 132

For advanced features
Hide thumbs Also See for Lumix DC-ZS200:
Table of Contents

Advertisement

This function is not intended for application-specific systems (monitoring cameras).
When using zoom, the camera could tilt when the lens barrel extends. Make sure to secure the
camera in place with a tripod or by other means.
[Time Lapse Shot] is paused in the following cases:
• When the remaining battery power runs out
• Turning the camera off
If the number of pictures set has not been taken yet, you can restart the operation by turning
off the camera in the pause state, replacing the battery or card, and then turning the camera on
again. (Note, however, that the pictures recorded after restarting the operation are saved as a
separate set of group pictures.)
We recommend using auto focus for time lapse recording in cases where a long [Shooting
Interval] is set and the camera will turn off automatically between shots.
When creating motion pictures at a picture quality size of [4K], recording times are limited to
29 minutes and 59 seconds.
If using an SDHC memory card, you will not be able to create motion pictures with a file size
greater than 4 GB. With an SDXC memory card, you can create motion pictures with a file size
greater than 4 GB.
When creating a motion picture with a picture quality size of [FHD] or [HD], you will be unable to
create it if the recording time is more than 29 minutes and 59 seconds or the file size is greater
than 4 GB.
This function is not available in the following cases:
• [Handheld Night Shot] (Scene Guide Mode)
• When [Multi Exp.] is set
• When using [Stop Motion Animation]
132
Taking pictures automatically at set intervals [Time Lapse Shot]
4K Photo and Drive Settings

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?

Questions and answers

Doug Knudson
April 11, 2025

a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.

1 comments:
Mr. Anderson
April 11, 2025

On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF