Table of Contents
Advertisement
■
To stop the automatic transfer of images
2
In step
, select [OFF].
• A confirmation screen is displayed, asking you to terminate the Wi-Fi connection.
●
When [Auto Transfer] in the [Bluetooth] is set to [ON], [Wi-Fi Function] is disabled.
●
If the file transfer is interrupted because the camera turns off, turn the camera on again to restart
file transfer.
• You may not be able to resend the files that did not get delivered if there is a change in their
storage status. For example, if you replace the card before turning on the camera again, the
files may not be resent.
• If the number of files that did not get delivered is large, it may not be possible to resend all of
the files.
●
Motion pictures, 4K burst files, and pictures recorded with [Post Focus] cannot be automatically
transferred.
●
RAW still pictures can be saved only on smartphones with Android 7.0 or higher or iOS 10.0 or
higher. The pictures, however, may not be displayed correctly on some smartphones or some
versions of operating systems.
241
Wi-Fi/Bluetooth
Controlling with a Smartphone
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated