Changing The Position And Size Of The Af Area; Adjusting The Af Area Position - Panasonic Lumix DC-ZS200 Owner's Manual

Changing the position and size of the AF area

Recording mode:
When [ ], [ ], [
position and size of the AF area. With [
• Perform these operations with the touch shutter function released.
• You can also display the AF area setting screen by touching the recording screen.
→ [Custom] →
→ [AF]
• You can use the [Custom] ([Focus / Release Shutter]) menu to set the display method
for the AF area according to your preference.
●
When you set [Metering Mode] to [
the AF area.
●
The position and size of the AF area cannot be changed in the Digital Zoom range.
■
When selecting [
→ [Rec] /
Select [ ], [
• The AF area setting screen appears.
To change the AF area
Operation
—
[DISP.]
*
Not available when [
Press [MENU/SET]
• AF area with the same function as [
selected. Setting of the AF area is cleared when [MENU/SET] is pressed or [
91
Focus, Brightness (Exposure) and Color tone Settings
], or [ ] in Auto Focus Mode is selected, you can change the
[Operation] → [Touch Settings] → [Touch AF]
] (spot-focusing), the metering target will move along with
] / [ ] / [ ]
[Motion Picture] → [AF Mode]
] or [ ] and press
Touch operation
Touch
Pinch out /
Pinch in
—
[Reset]
] is selected.
Taking pictures with Auto Focus
], you can set the lock-on position.
(→181)
To move the position of the AF area.
Enlarges/reduces the AF area in small steps.
Enlarges/reduces the AF area in large steps.
Resets the AF area back to the center.
• If you press the button again, the frame size will be
reset to the initial setting.
] is displayed in the touched position, when the [
Description
] is touched.
*
*
] is