Table of Contents
Advertisement
■
When connecting with [Via Network]
(On the camera)
Select [Via Network] and press [MENU/SET]
• Connect the camera to a wireless access point by following the connection method (→261).
(On your smartphone)
Turn on the Wi-Fi function in the setting menu
Select the wireless access point you connected to the camera, and set
Start "Image App"
■
When connecting with [Direct]
(On the camera)
Select [Direct] and press [MENU/SET]
• Connect the camera to the smartphone by following the connection method (→264).
(On your smartphone)
Start "Image App"
Closing the Wi-Fi connection
1
Set the camera to Recording Mode
• Press the shutter button halfway to return to recording mode.
2
Select the camera's menu items to terminate the Wi-Fi
connection
→
→ [Yes]
• You can also terminate the connection by pressing [Wi-Fi] button
on the camera.
3
On the smartphone, close "Image App"
●
When recording with 4K Pre-Burst with the smartphone, terminate the connection only after
switching to 4K Burst recording by pressing [Q.MENU/
233
[Setup] → [Wi-Fi] → [Wi-Fi Function]
Connecting the camera to a smartphone
] button on the camera.
Wi-Fi/Bluetooth
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated