Table of Contents
Advertisement
Auto Focus, Face/Eye Detection, and Face Recognition
[AF Mode] is automatically set to [
[
] and the AF tracking function starts operating.
• You can also switch to [
going to the [AF Mode] menu and selecting [
area with the subject and press the shutter button halfway to operate the AF tracking
function.
• When [Face Recog.] is set to [ON] and if the camera recognizes a face similar to a
registered face, [R] is displayed on the upper right corner of the [
icons.
Flash
When the flash is open, the camera will automatically be set to [
Reduction), [
], or [
●
When [
] or [
detect red-eye and correct the picture data.
●
When [
] or [
Automatic Scene Detection
When taking pictures
[i-Portrait]
[i-Night Portrait]
[i-Food]
/
When scene does not correspond to any of the above
When recording motion pictures
[i-Portrait]
/
When scene does not correspond to any of the above
*
1
Displayed only when using flash.
*
2
When [iHandheld Night Shot] is [ON].
*
3
When children (that are registered in the camera with Face Recognition) under 3 years old are
recognized.
53
Taking pictures with automatic settings (Intelligent Auto Mode)
]. If you touch the subject, the camera switches to
] by pressing [MENU/SET], going to the [Rec] menu, then
], depending on the type of subject and brightness.
] is displayed, the [Red-Eye Removal] function is activated to automatically
] is selected, the shutter speed is reduced.
[i-Scenery]
*
1
[i-Night Scenery]
[i-Baby]
[i-Scenery]
] (tracking). Align the AF tracking
*
3
[i-Low Light]
Recording mode
], [
], and [
], [
] (Auto/Red-Eye
[i-Macro]
[i-Handheld Night Shot]
[i-Sunset]
[i-Macro]
]
*
2
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated