Registering the WEB service to "LUMIX CLUB"
Check the "FAQ/Contact us" on the following site for compatible WEB services.
https://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation
Make sure that you have created an account on the WEB service you want to use, and have the login
information available.
1
Connect to the "LUMIX CLUB" site using a smartphone or computer
https://lumixclub.panasonic.net/eng/c/
2
Enter your "LUMIX CLUB" login ID and password and log in to the service
3
If you have not registered your email address with "LUMIX CLUB", register the
email address
4
Select the WEB service to be used for WEB service link settings and register it
• Follow the instructions on the screen to register the service.
Sending pictures
→
[Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Send Images While Recording] / [Send Images Stored in the Camera]
→ [Web service]
1
Select [Via Network] and connect
2
Select a WEB service you want to connect
3
Check the send settings, and select [Set]
• To change the send setting, press the [DISP.] button.
[Send Images While Recording]
4
Take a still picture
[Send Images Stored in the Camera]
4
Select the picture
●
When [Auto Transfer] in the [Bluetooth] is set to [ON], [Wi-Fi Function] is disabled.
255
(→261)
(→246)
(→247)
Using WEB services
(→248)
Wi-Fi/Bluetooth
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated