[ISO Auto Upper Limit (Photo)]
Recording mode:
You can set the upper limit of ISO sensitivity when ISO sensitivity is set to [AUTO] or
[
].
→
[Rec] → [ISO Auto Upper Limit (Photo)]
Settings: [AUTO] / [200] / [400] / [800] / [1600] / [3200] / [6400] / [12800]
●
This function is not available in the following cases:
• [Clear Nightscape], [Cool Night Sky], [Warm Glowing Nightscape], [Handheld Night Shot]
(Scene Guide Mode)
[Min. Shtr Speed]
Recording mode:
Sets the minimum value for the shutter speed to be used when ISO sensitivity is set to
[AUTO] or [
→
[Rec] → [Min. Shtr Speed]
Settings: [AUTO] / [1/16000] to [1/1]
●
The shutter speed may be slower than the setting value under recording conditions in which the
correct exposure is not achieved.
[Long Shtr NR]
Recording mode:
The camera can automatically eliminate the noise made when taking pictures with a
slower shutter speed (e.g. to record night scenes).
→
[Rec] → [Long Shtr NR]
Settings: [ON] / [OFF]
●
While the camera eliminates the noise, [Long shutter noise reduction ongoing] is displayed for the
same period as the shutter speed for the signal processing time.
●
This function is not available in the following cases:
• During motion picture recording
• When recording 4K photos
• When recording using [Post Focus]
• When using the electronic shutter
174
].
Using Menu Functions
Menu list
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated