Table of Contents
Advertisement
[Monochrome Live View]
You can display the recording screen in black and white. This function is useful when a
black and white screen will make it easier to adjust focus in Manual Focus mode.
●
When using the HDMI output during recording, the image is not displayed in black and white.
●
This does not affect recorded pictures.
[Constant Preview]
You can check the effects of the chosen aperture and shutter speed on the recording
screen in Manual Exposure Mode.
●
This function is disabled when the flash is used.
[Peaking]
When you perform Manual Focus operation, this function automatically adds color to the
portions of the image that are in Focus (portions on the screen with clear outlines).
●
When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing you
to achieve a more precise focus.
●
Changing the [Detect Level] setting also changes the [Display Color] setting as follows.
[Detect Level]
[Display Color]
●
Each time [
[LOW]) → [
●
This function is not available in the following case:
• [Rough Monochrome] (Creative Control Mode)
187
[HIGH]
[
] (Light blue)
[
] (Yellow)
[
] (Yellow Green)
[
] (Pink)
[
] (White)
] in [
] is touched, the setting is switched in order of [
] ([Detect Level]: [HIGH]) → [OFF].
→
[Custom] →
[LOW]
[
] (Blue)
[
] (Orange)
[
] (Green)
[
] (Red)
[
] (Gray)
Using Menu Functions
Menu list
[Monitor / Display]
] ([Detect Level]:
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated