Table of Contents
Advertisement
[Diffraction Compensation]
Recording mode:
The camera raises the resolution by correcting the blurriness caused by diffraction when
the aperture is closed.
→
[Rec] → [Diffraction Compensation]
Settings: [AUTO] / [OFF]
●
Noise in the periphery of the picture may stand out with higher ISO sensitivity.
[Silent Mode]
Recording mode:
Disabling the beeps and flash at the same time.
→
[Rec] → [Silent Mode]
Settings: [ON] / [OFF]
• This mode will mute beeps, set the flash to [
Assist Lamp.
The settings for the following functions are fixed:
– [Flash Mode]: [
– [Shutter Type]: [ESHTR]
– [AF Assist Lamp]: [OFF]
– [Beep Volume]: [
– [Shutter Vol.]: [
●
Even when this mode is set to [ON], the following lamps/indicators will light or flash.
• Self-timer indicator
• WIRELESS connection lamp
●
The operation sounds of this camera such as the lens aperture sound are not muted.
175
] (Forced Flash Off)
] (Off)
] (Off)
Using Menu Functions
] (Forced Flash Off), and disable AF
Menu list
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated