Table of Contents
Advertisement
Editing items registered in Favorite
→
[Setup] → [Wi-Fi] → [Wi-Fi Function]
→ [Select a destination from Favorite]
1
Select the Favorite item you wish to edit and press
[Remove from Favorite]
[Change the Order in Favorite]
[Change the Registered Name]
●
The number of settings that can be saved in the history is limited. Register and save frequently
used Wi-Fi connection settings to Favorites.
●
Performing [Reset Wi-Fi Settings] deletes content registered in History and Favorite.
●
If the device you want to connect to (smartphone, etc.) is connected to a wireless access point
other than the camera, you cannot connect the device to the camera using [Direct]. Change the
Wi-Fi settings of the device you want to connect to so that the access point to be used is set to the
camera.
You can also select [New Connection] and reconnect the devices.
●
When connecting to a network to which many PCs are connected, it may be difficult to make
the connection because the camera searches for previously connected equipment out of a large
number of equipment pieces. If you cannot connect, retry the connection using [New Connection].
266
Select the destination.
• For details on how to enter characters, refer to "Entering
Text"
(→51)
Wi-Fi/Bluetooth
About Wi-Fi connections
—
(→261)
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated