[Wi-Fi Setup] - Panasonic Lumix DC-ZS200 Owner's Manual

[Wi-Fi Setup]

Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
→ [Setup] → [Wi-Fi] → [Wi-Fi Setup]
[Priority of Remote Device]
[Wi-Fi Password]
You can improve security
by enabling password entry
for a direct connection to a
smartphone.
[LUMIX CLUB]
[PC Connection]
You can set the workgroup.
[Device Name]
You can change the name
(SSID) of this unit.
[Wi-Fi Function Lock]
To prevent incorrect operation
or use of the Wi-Fi function
by a third party and to protect
saved personal information,
it is recommended that you
protect the Wi-Fi function with
a password.
[Network Address]
Displays the MAC address and
IP address of this unit.
[Approved Regulations]
267
(→235)
[ON]: Connects the camera and a smartphone using an SSID and
password. (→231)
[OFF]: Connects the camera and a smartphone using an SSID.
(→230)
• When [ON] is selected, you can also set up a connection by
scanning a QR code.
Acquires or changes the "LUMIX CLUB" login ID.
You must connect to the same workgroup as the destination
computer when sending pictures to the computer.
(The default is set to "WORKGROUP")
Press [MENU/SET]
Enter the workgroup of the connecting PC
• For details on how to enter characters, refer to "Entering Text"
(→51)
• Pressing [DISP.] button will return the default setting
Press [DISP.] button
Enter the desired device name (Up to 32 characters can be
entered)
• For details on how to enter characters, refer to "Entering Text"
(→51)
[Setup]: Enter any 4-digit numbers as the password.
[Cancel]
• For details on how to enter characters, refer to "Entering Text"
(→51)
• If you forget the password, you can reset it with [Reset Network
Settings] (→204) in the [Setup] menu.
• A "MAC Address" is a unique address that is used to identify
network equipment.
• "IP address" refers to a number that identifies a PC connected to
a network such as the Internet. Usually, the addresses for homes
are automatically assigned by the DHCP function such as a
wireless access point. (Example: 192.168.0.87)
The authentication number is displayed.
Wi-Fi/Bluetooth
(→258)