Table of Contents
Advertisement
Using the smartphone to operate the shutter button via a Bluetooth
connection only
Wireless connectivity required:
1
Make a Bluetooth connection to the smartphone
2
Operate the smartphone
Select [
Select [Shutter Remote Control]
Take pictures
• Read the [Help] in the "Image App" menu for further details on how to operate [Shutter
Remote Control] of "Image App".
• [Shutter Remote Control] is available only when the Camera [ON/OFF] switch is set to [ON].
• The Live View screen of the camera cannot be viewed on a smartphone.
• When the camera turns off after [Sleep Mode] is activated during recording, select [Shutter
Remote Control] again using the smartphone to turn on the camera once more. (This function
is enabled only when [Remote Wakeup] is set to [ON] and [Auto Transfer] is set to [OFF].)
[B] (Bulb) (Approximately up to 120 seconds)
You can perform [B] (Bulb) recording when the shutter speed is set to [T]
(time) in Manual Exposure Mode.
This function is useful when you take pictures of stars in the night sky or a
night scene, since the shutter can be kept open from start of recording to end
of recording.
1
Operate the smartphone
Press [
] to start recording (Press and hold [
Release your finger from [
• Slide [
] in the direction of LOCK to record with the shutter button fixed in the fully pressed
condition. (Slide [
recording.)
• If Bluetooth is disconnected during the [B] (Bulb) recording, reconnect Bluetooth and perform the
operation to end recording using the smartphone.
• "[T] (time)" will be displayed on the camera screen.
237
Bluetooth
]
] to end recording
] back in the opposite direction or press the shutter button of the camera to end
Controlling with a Smartphone
(→227)
])
Wi-Fi/Bluetooth
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated