Table of Contents
Advertisement
Selecting pictures from 4K burst file and saving
1
Select a picture with the [
and press
• The same operation can be performed by touching [
• In the case of recording with [
3
the step
.
2
Drag the slide bar to perform rough scene selection
• For information on how to operate the slide view screen, refer to
(→111).
• If you touch [
scene in the 4K burst playback screen.
3
Drag to select the frame you want to save as a picture
• The same operation can be performed using
4
Touch [
• The selected picture will be saved as a new picture in the JPEG format separate from the 4K
burst file.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
If you use [4K PHOTO Bulk Saving] in the [Playback] menu, you can bulk save 5 seconds'
worth of 4K recording.
110
Recording with the 4K Photo function and selecting pictures to save
] on the playback screen,
] ([4K Pre-Burst]), proceed to
] (or press the [Fn2] button), you can choose a
] to save the picture
(→213)
].
(→112)
.
4K Photo and Drive Settings
Slide view screen
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated