Table of Contents
Advertisement
[AF+MF]
You can manually perform fine focusing during AF Lock (pressing the shutter button
halfway when [AFS/AFF/AFC] in [Rec] menu is set to [AFS] or setting AF Lock using the
[AF/AE LOCK]).
[MF Assist]
Sets whether to display the MF Assist (enlarged screen) during Manual Focus.
●
MF Assist is not displayed in the following cases:
• During motion picture recording
• When recording with [
• When using the Digital Zoom
[MF Assist Display]
Sets whether to display the MF Assist (enlarged screen) in a window or full screen.
[Operation Lock Setting]
You can set an object for which operation is disabled when [Operation Lock] is assigned
to the function button using [Fn Button Set]
[Cursor]
[Touch Screen] Disables the touch operation using the touch panel.
[Touch Settings]
Enabling/disabling the touch operation.
[Touch Screen]
[Touch Tab]
[Touch AF]
[Touch Pad AF]
185
] ([4K Pre-Burst]) of the 4K Photo function
Disables the operation of the cursor button and [MENU/SET] button.
All touch operations.
Operations of tabs, such as [
Operation to optimize the focus [AF] or both the focus and brightness
[AF+AE] for a touched subject.
Operation to move the AF area by touching the monitor when the
viewfinder is in use.
→
[Custom] →
→
(→47)
in the [Custom] ([Operation]) menu.
] displayed on the right side of the screen.
(→94)
Using Menu Functions
[Focus / Release Shutter]
[Custom] →
[Operation]
Menu list
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated