Table of Contents
Advertisement
Entering Text
Follow the steps below when the text entry screen is displayed.
1
Use
2
Press [MENU/SET] several times until the
desired character is displayed
• [
]: Enter a blank.
■
To change the character type
• Press [DISP.] button
• Use
■
To continue entering characters
• Use
• Move the zoom lever toward T side
• Rotate the rear dial counterclockwise.
■
To edit text
Use
the text to edit
• You can also use the zoom lever or rear dial to reposition the cursor.
Use
Use
3
When you are finished entering text, use
[Set] and press [MENU/SET]
●
A maximum of 30 characters can be entered (maximum of 9 characters when setting names in
[Face Recog.]).
●
A maximum of 15 characters can be entered for [
6 characters when setting names in [Face Recog.]).
51
to select characters
to select [
] and press [MENU/SET]
to select [ ] and press [MENU/SET]
to select [ ] [ ] and press [MENU/SET]. Then, move the cursor to
to select [Delete] and press [MENU/SET]
to select the correct text, and press [MENU/SET]
], [ ], [ ], [ ] and [
Basics
to select
] (maximum of
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated