Table of Contents
Advertisement
Change the Quick Menu to your preferred item
Up to 15 items can be set to the Quick Menu.
→
[Custom] →
1
After pressing the [Q.MENU/ ] button, press
select [
], and press [MENU/SET]
2
Press
and press [MENU/SET]
Top row: Items that can be set
Bottom row: Set items
• Items that are displayed in light gray in the top row have already
been set.
3
Press
to select the empty space in the bottom row
and press [MENU/SET]
• You can also set the menu item by dragging it from the top row to
the bottom row.
• If there is no empty space in the bottom row, you can replace an
existing item with a new select item by selecting the existing item.
• To cancel the setting, move to the bottom row by pressing
select an item to cancel, and then press [MENU/SET].
4
Press [Q.MENU/ ] button
• It will return to screen of step
46
Calling frequently-used menus instantly (Quick Menu)
[Operation] → [Q.MENU] → [CUSTOM]
to select the menu item in the top row
1
. Press [MENU/SET] to switch to the recording screen.
to
and
Basics
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated