Panasonic Lumix DC-ZS200 Owner's Manual page 281

Printing multiple pictures
Multiple pictures are printed at one time.
1
Press to select [Multi Print] in step
2
Use to select the item and press [MENU/SET]
[Multi Select]
[Select All]
[Rating]
3
Use to select [Print start] and press [MENU/SET]
●
The group pictures are displayed one by one instead of all pictures at the same time.
●
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional).
When the battery begins to run out during communication, a warning beep sounds. Cancel printing
and disconnect USB connection cable (supplied).
●
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable.
●
Some printers can print directly from the camera's memory card. For details, see the manual for
your printer.
●
A yellow "●" displayed during printing indicates an error message.
●
Print may be divided into several pictures if printing a large amount of pictures. (Remaining sheets
display may differ from the number of pictures set for printing.)
●
Motion pictures, 4K burst files, and pictures recorded with [Post Focus] cannot be printed.
●
Still pictures recorded in a RAW file cannot be printed. (The still pictures recorded in JPEG file
format at the same time as the RAW file can be printed.)
281
3
of "Printing"
Scroll between pictures with
[MENU/SET] (Press [MENU/SET] again to release selection.)
Press [DISP.] button to execute
Print all pictures.
Print pictures selected as [Rating].
Connecting with other devices
(→280)
, select pictures to print with
Printing