Objet500 User Guide
6. Close the waste compartment door.
Dispose of the full waste container in accordance with environmental and
safety requirements.
The painted exterior plastic panels of Objet500 3D printers have a durable
Cleaning the
finish, offering excellent chemical resistance to common cleaning materials.
Exterior Panels
Follow the recommendations below when cleaning these areas of the printer.
Acceptable Cleaning Agents
• mild soap solution
• common household cleaners and window cleaners
• common commercial and industrial detergents, 5% solution in water
• alcohol (ethanol, isopropanol), 10% to 40% solution in water
Wipe the exterior of the printer, using a soft cloth moistened with the
cleaning solution.
Unacceptable Materials
• industrial solvents
• cleaning agents containing hydrocarbons, ketones, esters and lacquer
thinners
• spray disinfectants
• abrasives and agents which could wear away the panel finish
DOC-07027 Rev. E
6 Operating and Maintaining the Objet500 3D Printer
6-85