Stratasys Objet500 User Manual page 39

Objet500 User Guide
Objet Studio
When Objet Studio opens, the Tray Settings screen appears, showing an
Interface
empty build tray.
Figure 5-4 Objet Studio opening screen
The Objet Studio interface consists of two main screens:
• Tray Settings—for arranging models and preparing them for printing.
• Job Manager—for monitoring and managing print jobs.
Each screen is controlled by menus and icons on its own ribbon. An
additional ribbon, Model Settings, displays controls for configuring and
manipulating selected models.
Objet Studio anticipates your workflow by displaying and enabling the options
relevant to your current task. For example, when you first open Objet Studio,
the Model Settings ribbon is disabled until you place a model on the build
tray. Similarly, options available from the standard toolbar menus are enabled
or disabled to match the current workflow.
DOC-07027 Rev. E
This screen is described in "Monitoring and Managing Print Jobs" on page
5-82.
5 Using Objet Studio
5-6