Objet500 User Guide
20. I n the Replace print heads screen, select the check box to confirm that
21. With your fingers, make sure that the new head is level and even with the
22. C onfirm that the heads are level by selecting the check box in the
DOC-07027 Rev. E
you have replaced the head(s), and click Next.
Figure 6-80 Head replacement confirmation
other heads.
Figure 6-81 Checking the level of the new head
following wizard screen, and click Next.
Figure 6-82 Installation-check screen
6 Operating and Maintaining the Objet500 3D Printer
6-58