Table of Contents
Advertisement
Objet500 User Guide
Test Results
To save and view a report of all tests:
➢ Use the Save and View command buttons.
Command Buttons
You click the command buttons, on the right side of the screen, to perform
the following operations:
Run
Click to run the selected tests.
Reset
Click to clear previously run tests. This returns the status of each test to
Unknown (?).
Save
Click to save a report that summarizes the tests run. The report is saved as an
HTML file. You can save any number of reports for the tests you run; the
name of the file saved is BITReport [date][time].htm. By default, these files are
saved in the Objet500 installation folder, but you can save it in any other
folder.
View
Click to display the latest test report that you saved. (You can view other test
reports by opening the relevant files in your Web browser. To do so, open
Windows Explorer, and double click the BITReport file.)
DOC-07027 Rev. E
6 Operating and Maintaining the Objet500 3D Printer
6-79
Advertisement
Chapters
Table of Contents
