Opengl Driver Configuration - Stratasys Objet500 User Manual

Objet500 User Guide
Automatic Zoom When Auto Zoom is selected in the Advanced section of the Options dialog
box, the display zooms in, to display the objects placed on the build tray. This
allows you to carefully inspect and manipulate the objects.
By default, this feature is not enabled. In any case, you can change the zoom
level, as necessary (see "Zoom Options" on page 5-54).
OpenGL Driver
The OpenGL driver displays 3D graphics on your screen. There is normally no
Configuration
reason to adjust its settings. If you suspect a problem with the way Objet
Studio displays objects, you can use the OpenGL Driver Configuration tool to
check and configure the driver settings.
To access the OpenGL Driver Configuration dialog box:
1. From the Tools menu, select Options.
2. In the Options dialog box, display the Troubleshooting tab.
The Troubleshooting tab is only accessible when Professional Mode is
active (see "Professional Mode Features" on page 5-75).
DOC-07027 Rev. E
or—
In the Objet Studio Commands menu
Figure 5-96 Access to OpenGL Driver configuration
5 Using Objet Studio
, click Options.
5-77