Stratasys Objet500 User Manual page 60

Objet500 User Guide
Digital
When different model materials appear on the ribbon, you can produce
Materials
objects from any of them. With Connex2 and Connex3 printers, you can
produce objects from a combination of them—digital materials. Different
combinations of model materials enable you to print objects with a wide
range of color and mechanical characteristics.
To view the digital materials available for printing objects (using three basic
model materials):
1. Make sure that you have selected the appropriate model materials, and
2. Click
DOC-07027 Rev. E
that Multiple Materials is selected.
Figure 5-28 Material selection with three basic model materials
.
The Material Selection Guide appears, showing the basic model materials
(at the top of the list) and the digital materials available (combinations of
them).
Figure 5-29 Material Selection Guide, showing the digital materials
available with the basic model materials
5 Using Objet Studio
5-27