Objet500 User Guide
2. After the printer-control computer boots, log in to Windows and launch
A HASP plug containing a valid product activation key is required on the
printer computer. This is installed at the factory or during printer upgrade.
If the application does not open and a HASP message appears, contact
your dealer or Stratasys Customer Support.
All monitoring and controlling of the printer is done from this interface.
Figure 6-3 Objet500 interface
Objet500 installations use one monitor for displaying both the computer
running Objet Studio and the computer installed inside the printer. Make
sure that the KVM (keyboard-video-mouse) switch is in the correct
position so that the printer interface is displayed.
DOC-07027 Rev. E
the printer-control program:
❒ On the printer-computer desktop, double-click the Objet500 printer
icon.
or—
❒ From the Start menu, select (All) Programs > Objet > Objet500.
6 Operating and Maintaining the Objet500 3D Printer
6-4