Stratasys Objet500 User Manual page 120

Objet500 User Guide
To disconnect Objet Studio from the printer:
1. On the Job Manager ribbon, in the 3D Printer group, click
2. In the Set Printer dialog box, click Connect (see Figure 5-105 on page 5-
3. In the Printer Connection dialog box, delete the computer name/IP
DOC-07027 Rev. E
85).
Figure 5-107 Disconnecting Objet Studio from a printer (A)
address.
Figure 5-108 Disconnecting Objet Studio from a printer (B)
5 Using Objet Studio
.
5-87