Table of Contents
Advertisement
Objet500 User Guide
7. In the following screen, make sure Optimize all print heads is selected,
8. Select the printing mode for which you want to optimize the print heads
If your printer is set to print in Single material mode, only the High Speed
and High Quality options are enabled.
If your printer is set to print in Digital Material mode, only the Digital
Material opiton is enabled.
DOC-07027 Rev. E
and click Next.
Figure 6-56 Procedure selection screen
and click Next.
Figure 6-57 Printing mode selection
6 Operating and Maintaining the Objet500 3D Printer
6-45
Advertisement
Chapters
Table of Contents
