Stratasys Objet500 User Manual page 41

Objet500 User Guide
Ribbon
The following table lists the Tray Settings and Model Settings ribbon
Commands
command groups, and shows when they are enabled, and where they appear.
Group
DOC-07027 Rev. E
Purpose
Setting display colors.
Selecting perspective
and zoom level.
Choose to select a plane,
elements, or element
groups (assemblies).
Change the perspective
of the active pane.
Assigning printing
material(s).
Undoing or redoing
actions.
Opening and saving files. Models are not
Placing model files on the
build tray.
Pre-build/build
commands.
5 Using Objet Studio
When enabled Tray
Settings
Ribbon
Always.
Models are on
the build tray.
Models are on
the build tray.
Models are on
the build tray.
Build tray is
empty.
Models are not
selected.
After an action or
object selection.
selected.
Always.
Models are on
the build tray.
Model
Settings
Ribbon
5-8