Stratasys Objet500 User Manual page 196

Objet500 User Guide
3. Confirm the items listed in the wizard screen and click Next.
Continue with "UV Measurement " on the next page
External UV Meter
The following steps apply when using a stand-alone UV meter. They do not
apply when using the Stratasys UV sensor box connected to the printer.
1. When the following screen appears, open the printer and place the UV
DOC-07027 Rev. E
Figure 6-94 Sensor preparation
sensor box at the rear edge of the tray, in the center.
Figure 6-95 Sensor placement screen
6 Operating and Maintaining the Objet500 3D Printer
6-65