Objet500 User Guide
an option that enables Objet Studio to print the tray by the most efficient
method (see "Printing-Mode Selection" on the next page).
E-mailing
You can easily e-mail objdf files using Microsoft
Objet Digital
objdf files is recommended (instead of stl files) because the size of a file is
Files
typically reduced by more than half. An added benefit is that the objdf file
contains the model-material information for the object.
To e-mail a file:
1. From the Tools menu, select Email Objet Digital File.
2. Enter the e-mail address and send the file.
Printing the
When a tray is ready to be printed, it is placed in the Jobs Queue. When the
Tray
job reaches the head of the queue, Objet Studio pre-processes the tray file to
create slices, and feeds them to the printer.
To send the tray to the print queue:
1. On the Tray Settings ribbon, Build Process group, click
Figure 5-73
DOC-07027 Rev. E
Outlook opens with the file attached and Subject details added to the
e-mail form.
❒ If printing the tray requires two or more model materials (Digital
Material mode), the Job Summary dialog box opens.
Job Summary when printing with multiple model materials
Note: The values displayed are the result of a quick calculation, and
represent a rough estimate of the materials and time input required to print
the job. For a more accurate calculation, click Fine Estimation.
Continue with step 4 on page 5-60.
5 Using Objet Studio
®
®
Office Outlook
. Sending
.
5-58