Stratasys Objet500 User Manual page 183

Objet500 User Guide
5. In the following screen, select Continue with Head optimization if you have
6. In the following screen, select Replace faulty heads, and click Next.
Preparing the Print Block
7. Select the print head(s) needing replacement, and click Next.
DOC-07027 Rev. E
recently cleaned the print heads. Otherwise, cancel the wizard and run the
Head Cleaning wizard.
Figure 6-67 Clean print heads screen
Figure 6-68 Procedure selection screen
Figure 6-69 Head selection screen
6 Operating and Maintaining the Objet500 3D Printer
6-52