Objet500 User Guide
Opening Objet
You can open trays that were saved as objtf files. (Saving objtf is described in
Tray Files
"Saving and Importing Build Trays" on page 5-67).
To place an object saved as an Objet Tray File (objtf) file on the build tray:
1. From the File group, click
2. Select the desired file, and make sure that it appears in the File name field.
3. Click Open.
The objtf file is actually a file containing instructions for printing—which stl
files to print and their position on the build tray. Because the objtf file
references the stl files used, they must remain in the same file location as
when the objtf file was saved.
DOC-07027 Rev. E
or—
From the Objet Studio Commands menu
The Open dialog box is displayed.
Figure 5-16 Objet Tray File Open dialog box
If the Preview check box is selected, the object is displayed.
Objet Studio opens the tray file.
.
, select Open.
5 Using Objet Studio
5-18