Stratasys Objet500 User Manual page 121

Objet500 User Guide
4. Click OK.
5. Click OK.
6. In the pop-up message, confirm that you want to work in off-line mode by
When Objet Studio is in off-line mode, you can configure it for preparing
print jobs for different printers.
To change the Objet Studio off-line configuration:
1. In the Set Printer dialog box, select a printer type.
2. Click OK (not "Connect").
DOC-07027 Rev. E
"Unknown" appears in the printer-name field.
clicking No.
Figure 5-109 Off-line message
Figure 5-110 Off-line printer selection
5 Using Objet Studio
5-88