Stratasys Objet500 User Manual page 148

Objet500 User Guide
To select the slots for the cartridges manually:
1. In the Material Replacement Options screen, click Advanced Settings.
2. In the Advanced Settings screen, select Manual slot selection, and click
3. In the Material Replacement Options screen, select or clear the Both
4. When a check box is cleared, a dropdown menu appears. Select L (left) or
DOC-07027 Rev. E
Apply.
Figure 6-13 Manual slot selection
cartridges check box for each slot, as required.
Figure 6-14 Material Replacement Options (Advanced)
R (right) to change the cartridge on the left or the right side only in that
location.
6 Operating and Maintaining the Objet500 3D Printer
6-17