Printing Indicators - Stratasys Objet500 User Manual

Objet500 User Guide
Printing
The printer interface screen changes when you send a print job to the printer
Indicators
(from Objet Studio), if the printer is on line:
• The mode changes from Pre-print to Printing.
• The specific activity being performed is shown in the "current activity"
• Current job-printing information is displayed.
• The printing progress bar is displayed.
• The Stop and Pause buttons are enabled.
When the weight of a cartridge drops below 100 grams, the display of the
material level in the printer interface is red.
Figure 6-5 P rinter interface during printing
DOC-07027 Rev. E
field.
6 Operating and Maintaining the Objet500 3D Printer
6-9