Stratasys Objet500 User Manual page 50

Objet500 User Guide
Opening objdf Files
Before placing objdf files on the build tray, Objet Studio must extract the
component stl files together with information about their relative position
and model materials. To do this, Objet Studio creates a folder with the same
name as the objdf file, in the same location.
If you are opening an objdf file, the Insert dialog box also includes a
Materials field that shows the object's printing material assignment (see
below).
DOC-07027 Rev. E
Figure 5-15 Insert dialog box (objdf file)
5 Using Objet Studio
5-17