Objet500 User Guide
To cancel plane selection after re-aligning objects on the build tray:
➢ On the Tray Settings or Model Settings ribbon—
➢ From the Tools menu, select Plane Alignment > Select Plane.
To flip an object 180 degrees on any axis:
1. Select the object.
2. From the Object menu, select Flip > Flip X / Flip Y / Flip Z.
To make precise changes to the object's orientation on any axis:
1. Select the object.
2. Display the Transform dialog box (see Figure 5-47 on page 5-40).
3. Change the Rotate parameters for each axis.
DOC-07027 Rev. E
a. Click the icon in the Selection group:
b. On the flyout toolbar, click the Select Element or Select Group icon:
or—
5 Using Objet Studio
or
.
5-43