Stratasys Objet500 User Manual page 185

Objet500 User Guide
Removing the Defective Head
10. On the print block, release the upper and lower screws that secure the
11. Press down on the upper and lower locking screws to release the print
DOC-07027 Rev. E
print head in the block. (If necessary, you may use a screwdriver to loosen
the screws.)
Figure 6-72 Releasing the locking screws
head.
Figure 6-73 Releasing the print head
6 Operating and Maintaining the Objet500 3D Printer
6-54