Maintenance Counters - Stratasys Objet500 User Manual

Objet500 User Guide
Maintenance
The printer computer application records the dates and frequency for each
Counters
maintenance task. You can display the Maintenance Counters screen from
the Options menu.
Figure 6-20 Selecting Maintenance Counters
If there is a maintenance task due, this is indicated on the main interface
screen.
Figure 6-21 Maintenance Required indicator
If this indicator appears, you can display the Maintenance Counters screen by
clicking on it.
The Maintenance Required indicator appears by default for most
operator-performed maintenance tasks. The check box under "User
Warning" controls whether or not it appears when a particular task is due.
DOC-07027 Rev. E
6 Operating and Maintaining the Objet500 3D Printer
6-24