Table of Contents
Advertisement
Operating & Maintaining the Connex500/350 3D Printer
Cleaning the
Exterior Panels
6–70
The painted exterior plastic panels of Connex 3D printers have a durable
finish, offering excellent chemical resistance to common cleaning materials.
Follow the recommendations below when cleaning these areas of the
printer.
Acceptable Cleaning Agents
•
mild soap solution
•
common household cleaners and window cleaners
•
common commercial and industrial detergents, 5% solution in water
•
alcohol (ethanol, isopropanol), 10% to 40% solution in water
Wipe the exterior of the printer, using a soft cloth moistened with the
cleaning solution.
Unacceptable Materials
•
industrial solvents
•
cleaning agents containing hydrocarbons, ketones, esters and lacquer
thinners
•
spray disinfectants
•
abrasives and agents which could wear away the panel finish
DOC-13025 Rev. A
Advertisement
Table of Contents
