Digi Connect Sensor+ User Manual page 97

CLI commands
Option
UTC Time
Battery Life
Connect Sensor modem and cellular connection options
The following information displays when the modem is connecting or has connected. These fields
display depending on the status of the modem connection to the cellular network.
Option
Mobile support
software
Device type
Manufacturer
Model
Modem revision
Serial number
Provider
Phone number
SIM IMSI
SIM ICCID
SIM PIN status
Signal strength
Signal quality
Connection state
Connection duration
Disconnect reason
Connections
Connection errors
User disconnects
Monitoring errors
Device resets
Digi Connect Sensor+ User Guide
Description
Last reported date and time.
Amount of battery life remaining. See
Description
Version of the mobile software.
Cellular network type the device connects to.
Cellular modem manufacturer.
Cellular modem model number.
Modem firmware version.
Modem serial number.
Cellular provider.
Phone number registered to the activated SIM card.
Unique user identifier for the cellular network.
SIM serial number.
State of the SIM card.
Strength of the cellular signal. See
the CLI.
Quality of the cellular signal. This measures signal interference.
Cellular connection state.
Amount of time the cellular modem was connected during last wake cycle.
Cause of the cellular modem disconnection during last wake cycle.
Number of cellular connection attempts since power up.
Number of failed connections since power up.
Number of normal disconnections since power up.
Number of cellular modem errors since power up.
Number of times cellular modem was reset to recover from errors since
power up.
View battery life using the
Verify cellular network coverage using
status
CLI.
97