Digi Connect Sensor+ User Manual page 2

Revision history—90001491
Revision Date
M April 2019
N May 2019
P December 2019
R January 2021
S July 2021
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2021 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Send comments
Documentation feedback: To provide feedback on this document, send your comments to
techcomm@digi.com.
Digi Connect Sensor+ User Guide
Description
Added LED information.
Added information about the external power source and
battery usage.
Added gasket lubricant information.
Removed HART® protocol information as it is no longer
supported.
Removed gasket lubricant information as it is no longer
needed.
Removed references to the abt/alm datapoint.
Removed information about the CE mark.
Added reset configuration
Factory button is disabled. Updated
ports and buttons.
Updates to battery information
Updated Get started section.
Updated Warnings: Explosion
CLI command.
Digi Connect Sensor+
and Battery safety.
hazards.
2