Table of Contents
Advertisement
Safety information
Assembly safety information
The following safety information provides guidelines when assembling the Digi Connect Sensor+
device. For additional safety guidelines, see
CAUTION! The device is sensitive to electrostatic discharge (ESD).
The Digi Connect Sensor+ device must be maintained only by Digi or a Digi qualified technician.
Move the device to a non-hazardous and unclassified area before opening the enclosure and
n
connecting the hardware.
To avoid the risk of the battery falling into a protected area, do not assemble the device in the
n
installation area.
You may be required to have a licensed electrician install or perform maintenance on this
n
equipment. Always follow applicable local, state, and federal codes and guidelines.
Battery safety
Always use the designated battery, model number 76000912, from Digi International Inc.
Allow only a trained technician to replace the lithium thionyl chloride batteries used in
Digi Connect Sensor+.
Prior to installation, the battery should be inspected for any signs of damage. If the
battery appears to be damaged or is dropped during the installation, do not use the
battery and dispose of it properly. See
Digi Connect Sensor+ User Guide
Safety
notices.
Battery inspection
for more information.
118
Advertisement
Table of Contents
Need help?
Do you have a question about the Connect Sensor+ and is the answer not in the manual?
Questions and answers