Configure Device (Report) Settings - Digi Connect Sensor+ User Manual

Configure Digi Connect Sensor+ device settings
3. Click Device Management > Devices tab.
4. Double-click the Digi Connect Sensor+ device you want to configure.
5. Expand the Configuration menu.
5. Click Local Interface Settings.
6. Enable or disable the command line interface. The CLI is disabled by default.
For CLI Enable, select On to enable CLI.
n
For CLI Enable, select Off to disable CLI.
n
7. Enable Bluetooth. Bluetooth is disabled by default.
a. For Bluetooth Enable, select On to enable Bluetooth.
b. In the Bluetooth Device Name field, enter a value for the Bluetooth device name.
Note You can disable Bluetooth by selecting Off for Bluetooth Enable.
8. Apply the configuration changes:
a. Click Save > Schedule. The Save Device Properties dialog appears.
b. Select Immediate.
c. Select Schedule Offline.
d. Click Schedule. Digi Connect Sensor+ downloads and applies configuration changes

Configure device (report) settings

Use the Device Settings options in Remote Manager to configure Digi Connect Sensor+ reporting.
Together, these options control how often Digi Connect Sensor+ captures data, how often data is
reported, and how much data is included when it is sent to Remote Manager.
For details about the configuration options, see
CAUTION! If Digi Connect Sensor+ sends reports less than 15 minutes apart, it may
result in an internal temperature that is above the ambient temperature.
Note Reporting to Remote Manager more than twice a day reduces the battery life.
For example, the following settings cause the device to read the sensor input values every half hour,
report that information twice a day, and send only the last four readings:
Read Sensor Every: 30 minutes
n
Report Sensor Data Every: 24 reads
n
Send Last: 4 readings
n
If the sensor value reaches an alarm threshold, that data is sent as an alarm report during the next
device wake cycle regardless of device settings.
To configure device options:
Digi Connect Sensor+ User Guide
the next time it connects to Remote Manager.
Configure device (report) settings
Device (report) settings option definitions.
57