View Device Information; View Device Information In Remote Manager - Digi Connect Sensor+ User Manual

View device information

You can view current information about the device, such as battery percentage, connection history,
mobile and cellular connection details, UTC time, and firmware versions.
You can view device information in either Remote Manager or in the CLI.

View device information in Remote Manager

n
View battery life for a device in Remote Manager
n
Use the CLI to view status information for the device
n
View battery life using the CLI
n
View device information in Remote Manager
The battery percentage, connection history, mobile and cellular connection details, UTC time, and
firmware versions are available in the System Information menu in Remote Manager. This information
is available from the last time Digi Connect Sensor+ reported to Remote Manager.
Note For more information about Remote Manager, visit
manager.
1. Sign in to Remote
2. Click the arrow next to your user name and choose Open Classic Remote Manager.
3. Click Device Management > Devices.
4. Double-click the Digi Connect Sensor+ device you want to review.
5. Click System Information > UTC Time to verify the time and date of the last report. The
system information was current at that time and date.
6. Select a system detail in the System Information node to see additional information.
Click System Information > Battery Percentage to view the percentage of battery
n
power remaining. If the remaining percentage is low, you should change the battery.
For instructions, see
Click System Information > Mobile Information to view information about the device
n
and the firmware, such as the cellular signal strength.
Click System Information > Version to view the version of the firmware installed on
n
the device.
Digi Connect Sensor+ User Guide
Manager.
Replace a battery.
www.digi.com/products/cloud/digi-remote-
59