Digi Connect Sensor+ User Manual page 79

Option Description
Serial baud The baud rate.
bits
Serial data The number of data bits that can be sent in a packet.
bits
Serial stop The bit that marks the end of a unit transition.
bits
Serial parity The check bit for detecting an error in transmission.
A station address configured for the sensor.
Station 1:
When the value is set to 0, this station is skipped.
Client
Address
Station 1: List of variable addresses on the specified station that you want to monitor. The items in the list must be
Variable List separated by a comma without spaces. The list is limited to 63 characters, which allows for 8 to 10 variables
in a list.
A station address configured for the sensor.
Station 2:
When the value is set to 0, this station is skipped.
Client
Address
Station 2: List of variable addresses on the specified station that you want to monitor. The items in the list must be
Variable List separated by a comma without spaces. The list is limited to 63 characters, which allows for 8 to 10 variables
in a list.
A station address configured for the sensor.
Station 3:
When the value is set to 0, this station is skipped.
Client
Address
Range
Default
600 - 230400
19200
(fixed values
within this
range)
7
8
8
1
1
2
none
none
odd
even
0 - 247
0
63 characters blank
0 - 247
0
63 characters blank
0 - 247
0