Remote Manager Cli Commands - Digi Connect Sensor+ User Manual

Remote Manager CLI commands

Use the following commands with the set command when configuring the device with the CLI. All Remote Manager configuration values are
preconfigured. supplied by your cellular service provider. Do not make changes to this setting without help from Digi Technical Support.
CLI
Option command
Server name isn
SSL ssl
NTP server name nsn
Description
Specifies the URL that connects your device to Remote Manager. This
setting is configured by default.
Enables SSL encryption for data sent from Digi Connect Sensor+ to
Remote Manager.
Note Enabling SSL encryption significantly increases cellular data
usage.
Network Time Protocol (NTP) server name that synchronizes Digi
Connect Sensor+ time with Coordinated Universal Time (UTC). This
setting is configured by default.
Values
my.devicecloud.com
on
n
off (default)
n
time.devicecloud.com