View Device Data Streams - Digi Connect Sensor+ User Manual

View device and sensor data streams
Data streams for custom scaled values
Remote Manager includes two data streams that report input values:
val: Raw measurement in its original value, such as mA, voltage, or pulses.
n
cval: Calculated measurement in its custom value, such as liters, watts, miles per hour,
n
degrees, and so on. This appears in data streams only when you configure Custom Scaled
Sample settings for analog inputs or Custom Scaling Factor for a digital pulse counter.
The following images show how these two data streams appear in Remote Manager:
Additional information
To learn more about:
Data stream groups and group-specific short names for Digi Connect Sensor+, see
n
definitions.
General information for Remote Manager data streams, see the
n
Remote Manager User

View device data streams

To view data for a Digi Connect Sensor+ device:
1. Sign into Remote
2. Click your user name and select Open Classic Remote Manager.
3. Access the Data Streams view:
Click Device Management, double-click your device, and click View Device Streams.
n
Click Data Services and enter the 15-digit device IMEI in the search field.
n
The Data Streams view appears showing all reported data for the selected device.
Digi Connect Sensor+ User Guide
Use Remote Manager to view device and sensor data streams
Guide.
Manager.
Data stream
Data Streams section in the
62