Internal Temperature Option Definitions - Digi Connect Sensor+ User Manual

Internal Temperature option definitions

The following table provides Remote Manager internal temperature monitoring options for Digi Connect Sensor+. For additional information about using
these options, see Configure internal temperature
CAUTION! If Digi Connect Sensor+ sends reports less than 15 minutes apart, it may result in an internal temperature that is above the
ambient temperature.
Option Description
Interface Enables or disables the internal temperature sensor.
Enable
High Alarm Enables or disables high alarm reports for the internal temperature value.
High Specifies the internal temperature in degrees Celsius that generates a high alarm report when High
Alarm is On .
Threshold
Low Alarm Enables or disables low alarm reports for the internal temperature value.
Low Specifies the internal temperature in degrees Celsius that generates a low alarm report when Low
Alarm is On .
Threshold
Specifies the degrees in Celsius to keep an alarm on or shut off an alarm during high and low alarm
Hysteresis
states.
0 — Hysteresis is off
1 or more — Hysteresis is on and managing alarms
settings.
Range
Default
On/Off Off
On/Off Off
-100 to 100 50.0
On/Off Off
-100 to 100 0
0 to 100 5.0